Neo-Angle Shower Glass

Neo-Angle Shower Glass in Edmond, OK

Corner showers with an angled front need three panels that meet at 135 degrees. We measure, build and fit all three.

A neo-angle shower sits in a corner and has an angled front, so its glass is three panels that meet at 135 degrees instead of 90. Bob's Shower Plus measures, builds and installs neo-angle shower glass for homes in Edmond and the Oklahoma City area, and owner Robert Hensley brings 45 years of experience to every corner. We align and measure the shower on site with a 135-degree laser, return your quote, and then fabricate and install all three tempered glass panels.

Popular Choices Include:

Layout: Two angled side panels and a front panel, usually with the door in front.
Glass: Three custom-cut tempered panels, typically 10 mm to 12 mm thick.
Hardware: Specialized 135-degree hinges and clamps made for the angled corner.
Seals: Magnetic strike seals on the door and watertight vinyl sweeps.

Because the panels meet at an angle, a neo-angle shower needs both the right measurements and the right hardware to close tight. Call Robert at (405) 837-2330 to book your on-site measurement.

Call Us Now

Neo-Angle Shower Glass installed in a modern bathroom

Our process

How We Plan Your Neo-Angle Shower Project

Corner showers are measured differently from square ones. When we visit, we check the diamond-shaped base, the two walls and where the door will swing, then align and measure the corner with a 135-degree laser so all three panels line up. We talk through the glass finish and the 135-degree hardware, and explain how the magnetic strike seal closes the door. You get your quote first. Once you approve it, we fabricate the three tempered panels and install them with the hinges, seals and vinyl sweeps that keep the water in.

Call Us Now

The difference

Why Choose Us

Built for 135-Degree Corners

Square-shower hardware does not fit an angled corner. We install specialized 135-degree hardware so the panels meet cleanly.

A Door That Closes Tight

Magnetic strike seals pull the door closed against the glass, and vinyl sweeps seal the bottom edge.

Measured Before Anything is Made

We align and measure your corner with a 135-degree laser on site, so all three panels are built to fit together.

Common questions

Frequently Asked Questions

What is a neo-angle shower?

It is a corner shower with an angled front and a diamond-shaped base. The glass is made of three panels that meet at 135-degree angles.

How thick is neo-angle shower glass?

We fabricate neo-angle panels in tempered glass, typically 10 mm to 12 mm thick.

Why does a neo-angle shower need special hardware?

The panels meet at 135 degrees, so the hinges, clamps and seals are made for that angle. We install 135-degree hardware, magnetic strike seals and watertight vinyl sweeps.

Can you replace the glass on an existing neo-angle shower?

Call (405) 837-2330 and describe your shower. We will measure the corner on site and quote new panels.